LKE-7号钢焊条(SUPER-7) 特 性 耐冲击与金属间磨耗,直接焊于热处理后的Cr12MoV钢上,可全位置焊接,硬度HRC52~57. Impact resistance and metal abrasion, directly welded to the Cr12MoV after heat treatment, but the position on the steel welding, hardness HRC52-57 用 途 汽车大型模具硬面制做,冷冲模刀口焊接Auto giant mould making, cold die cutting hardfaced welding. 规 格 2.6¢ 3.2¢ GNK-7A刃口焊条 特 性 熔敷金属具有高硬度的马氏体组织,耐磨耗耐冲击性能优良,硬度HRC55~58. Deposited metal of martensite with high hardness, good abrasion resistance, impact resistant performance of hardness HRC55 ~ 58. 用 途 切模,冲压模具的刃口焊材,也可以在碳钢上堆焊制成新工具. Cutting, welding blade of stamping mould, also can be made in the new tool steel #. 规 格 2.6¢ 3.2¢ 4.0¢
适用范围 | 汽车模具修补 |
LKE-45号钢- 模具堆焊用焊条 |
|||||||||
用途 |
45号钢,用于热啤模、刀口及一切虚承受磨擦、撞击的工作物,焊金可加工。 |
||||||||
成份 |
C Mn Si Cr 及特殊元素。 |
||||||||
注意事项 |
(1) 焊条使用前先再干150℃~200℃烘干30~60分钟。 (2) 通常施以200℃以上预热,焊接后空冷,可能的话最好实施应力消除。 |
||||||||
技 术 参 数
|
条 件 |
Vicker’s硬度(Hv) |
Rockwell’s硬度(HRC) |
Shore’s硬度(Hs) |
|||||
层间温度100℃以下 |