上海斯米克HL313银焊条
上海斯米克HL313银焊条
产品价格:¥0(人民币)
  • 规格:齐全
  • 发货地:济南市
  • 品牌:
  • 最小起订量:1公斤
  • 免费会员
    会员级别:试用会员
    认证类型:企业认证
    企业证件:通过认证

    商铺名称:山东焊桥焊材有限公司

    联系人:赵红乐(先生)

    联系手机:

    固定电话:

    企业邮箱:18663728900@163.com

    联系地址:山东省济南市天桥区西泺河路1号

    邮编:250000

    联系我时,请说是在焊材网上看到的,谢谢!

    商品详情
      上海斯米克电焊条】简介

      Category

      Trade-
      Mark

      Equivalent to China Standard
      相当国标

      Characteristics & application
      特性和用途

      Equivalent to AWS
      相当AWS

      Hard-surfacing

      D 667

      EDZCr-B-15

      HRc48. Resistance to wear, gas corrosion and oxidation. Hardfacing of blast furnace hopper and cracker part.
      HRc48,耐磨、耐气蚀、抗氧化。堆焊高炉料钟、破碎机件

       

      D 802

      EDCoCr-A-03

      HRc38-47. Resistance to heat, wear and corrosion. Hardfacing of high temperature part such as the edge of thermo-cutter.
      HRc38-47,耐热、耐蚀、耐磨。堆焊高温工件如热剪切刀刃

      ECoCr-A

      D 812

      EDCoCr-B-03

      HRc45-50. Resistance to heat, wear and corrosion. Hardfacing of high temperature part such as internal-combustion engine valve.
      HRc45-50,耐热、耐蚀、耐磨。堆焊高温工件如内燃机阀

      ECoCr-B

      D 822

       

      HRc53. Resistance to Wear and heat, bad shock resistance. Hardfacing of rotating blade wheel of boiler.
      HRc53,耐热、耐磨,但抗冲击性差。堆焊锅炉旋转叶轮

       

      D 832

      EDCoCr-C-03

      HRc50. Wear and heat resistance. Hardfacing of high temperature part such as hot-rolling guided way.
      HRc50,耐热、耐磨。堆焊高温工件如热轧导轨

      ECoCr-C

      D 842

      EDCoCr-D-03

      HRc28-38. Corrosion and thermo-fatigue resistance, work harding. Hardfacing of hot forging die.
      HRc28-38,耐蚀、抗热疲劳,具有加工硬化性。堆焊热锻模

       

       

      Cast iron

      Z 308

      EZNi

      Pure nickel, excellent general properties. Used to weld thin cast iron part and repair welding machined surface, such as guided way of machine tool.
      纯镍,综合性能好。铸铁薄件及加工面补焊用,如机床导卫

      ENi-Cl

      Z 408

      EZNiFe

      Iron nickel, high strength and excellent ductility. Repair welding of important gray cast iron and nodular cast iron, such as cylinder cap.
      镍铁,强度高、塑性好。重要灰铸铁及球铁焊补用,如汽缸盖

      ENiFe-Cl

      Z 508

      EZNiCu-1

      Copper nickel, good machinability and bad crack resistance. Repair welding of sand hole and gray cast iron machined surface subject to no load.
      镍铜,易加工,但抗裂性较差。不受力的灰铸铁加工面及砂眼补焊

      ENiCu-B

       

      Copper alloys

      Cu 107

      ECu

      Red copper, atmosphere and sea water corrosion and excellent electric conductivity. Welding of red copper such as electrical copper row.
      紫铜,耐大气,海水腐蚀,导电性好。紫铜焊接用,如导电铜排

      ECu

      Cu 207

      ECuSi

      Silicon bronze, corrosion resistance and high strength. Welding of copper, silicon bronze and brass.
      硅青铜,耐蚀、强度高。铜、硅青铜及黄铜焊接用

      ECuSi

      Cu 227

      ECuSnB

      Tin phosphor bronze, corrosion resistance and high strength. Welding of copper, silicon bronze and brass.
      锡磷青铜,耐蚀、强度高。铜、硅青铜及黄铜焊接用

      ECuSn-C

      Cu 237

      ECuAl

      Aluminum bronze, wear and corrosion and high strength. Welding or surfacing of copper alloys.
      铝青铜,耐磨、耐蚀,强度高。铜合金焊接或堆焊用

      ECuAl-A2

      Aluminum alloys

      Al 109

      TAl

      Pure aluminum, excellent corrosion resistance and middle strength. Welding of pure aluminum.
      纯铝,耐蚀性好,但强度不高,纯铝焊接用

      E1100

      Al 209

      TAlSi

      Silicon aluminum, good crack resistance and wide range of usage. Welding of aluminum alloys other than aluminum magnesium alloys.
      铝硅,抗裂性好,通用性大。铝合金焊接用,不宜焊接铝镁合金

      E4043

      Al 309

      TAMn

      Manganese aluminum, corrosion resistance and high strength. Welding of aluminum alloys.
      铝锰,强度高,耐蚀。铝合金焊接用

      E3003

      Nickel alloys

      镍合金

      Ni 102

      ENi-1

      Pure nickel. Welding and surfacing of nickel and nickel to steel.
      纯镍,用于镍、镍与钢的焊接与堆焊

      ENi-1

      Ni 207

      ENiCu-7

      Copper nickel. Welding and surfacing of copper nickel and copper nickel to steel.
      镍铜,用于镍铜、镍铜与钢的焊接与堆焊

      ENiCu-7

      Category

      Trade
      mark

      Chemical composition

      主要成份(%)

      Characteristics & application

      特性和用途

      Equivalent to AWS

      相当AWS

      Hardfacing

      S 101

      C3 Cr28 Ni4
      Si3.5 Fe Rem.

      HRc48-54. Resistance to wear, gas corrosion and oxidation. Hardfacing of bucket tooth and case pump.
      HRc48-54,耐磨、耐气蚀、抗氧化。堆焊铲斗齿,泵套

       

      S 111

      C1 Cr29 W5
      Co Rem.

      HRc38-47. Resistance to wear and corrosion at high-temperature. Hardfacing of high temperature and pressure valve.
      HRc38-47,高温下耐磨、耐蚀。堆焊高温高压阀门

      ECoCr-A

      S 112

      C1.5 Cr29 W8
      Co Rem.

      HRc45-50. Resistance to wear and corrosion at high-temperature. Hardfacing of valve and hot-rolling pass.
      HRc45-50,高温下耐磨、耐蚀。堆焊阀门,热轧孔型

      ECoCr-B

      S 113

      C2.5 Cr30 W17
      Co Rem.

      HRc55. Wear and heat resistance at high temperature, bad shock resistance. Hardfacing of screw charging carriage.
      HRc55,高温下耐磨、耐热,但抗冲击性差。堆焊螺旋送料机用

       

      S 114

      C2.5 Cr30 W12
      Co Rem.

      HRc53. Wear and heat resistance at high temperature, bad shock resistance. Hardfacing of three-cone bit.
      HRc53,高温下耐磨、耐热,但抗冲击较差。堆焊牙轮钻头

      ECoCr-C

      Copper

      alloys

       

       

      S 201

      Sn1 Si0.3Mn0.3
      Cu Rem.

      Good mechanical properties and crack resistance. Gas welding and argon arc welding of red copper.
      机械性能好,抗裂性好。紫铜气焊及氩弧焊用

      ERCu

      S 211

      Si3 Mn1
      Cu Rem.

      Good mechanical properties. Argon arc welding of copper alloys and MIG brazing of steel.
      机械性能好,铜合金氩弧焊及钢的MIG钎焊用

      ERCuSi-Al

      S 212

      Sn5 Cu Rem.

      Wear resistance. Argon arc welding of copper alloys and surfacing of steel.
      耐磨性好。铜合金氩弧焊及钢的堆焊用

      ERCuSn-A

      S 213

      Sn8 Cu Rem.

      Wear resistance. Argon arc welding of copper alloys and surfacing of steel.
      耐磨性好。铜合金氩弧焊及钢的堆焊用

      ERCuSn-C

      S 214

      Al7.5 Cu Rem.

      Wear and corrosion resistance. Argon arc welding of copper alloys and surfacing of steel.
      耐磨、耐蚀。铜合金氩弧焊及钢的堆焊用

      ERCuAl-A1

      S 215

      Al9 Cu Rem.

      Wear and corrosion resistance. Argon arc welding of copper alloys and surfacing of steel.
      耐磨、耐蚀。铜合金氩弧焊及钢的堆焊用

      ERCuAl-A2

      S 221

      Cu60 Sn1 Si0.3
      Zn Rem.

      Melting point is about 890. Gas welding and carbon arc welding of brass, also braze welding of copper, steel and cast iron.
      熔点约890℃。黄铜气焊及碳弧焊用,也可钎焊铜、钢、铸铁

       

      S 221F

      Cu60 Sn1 Si 0.3
      Zn Rem.

      S221 welding rod coated with flux.
      外涂焊剂的S221焊丝

       

      S 222

      Cu58Sn0.9Si0.1
      Fe0.8 Zn Rem.

      Melting point is about 880. Gas welding and carbon arc welding of brass, also braze welding of copper, steel and cast iron.
      熔点约880℃。黄铜气焊及碳弧焊用,也可钎焊铜、钢、铸铁

      RBCuZn-C

      S 222F

      Cu58Sn0.9Si0.1
      Fe0.8 Zn Rem.

      S222 welding rod coated with flux.
      外涂焊剂的S222焊丝

      RBCuZn-C

      S 223

      Cu59 Sn0.6
      Zn Rem.

      Melting point is about 900. Braze welding of copper, steel and cast iron.
      熔点约900℃。铜、钢、铸铁钎焊用

      RBCuZn-A

      S 224

      Cu62 Si0.5
      Zn Rem.

      Melting point is about 905. Gas welding and carbon arc welding of brass, also braze welding of copper, steel and cast iron.
      熔点约905℃。黄铜气焊及碳弧焊用,也可钎焊铜、钢、铸铁

       

      Copper
      alloys

      S 225

      Cu48 Ni10
      Zn Rem.

      Melting point is about 935 and high strength. Braze welding of steel, nickel and carbide alloys.
      熔点约935℃。高强度,钎焊钢、镍及硬质合金用

      RBCuZn-D

      S 225F

      Cu48 Ni10
      Zn Rem.

      S225 welding rod coated with flux.
      外涂焊剂的S225焊丝

      RBCuZn-D

      S 226

      Cu60 Sn0.3
      Si0.2 Zn Rem.

      Melting point is about 900. Gas welding of brass, also braze welding of copper, steel and cast iron.
      熔点约900℃。黄铜气焊用,也可钎焊铜、钢、铸铁

       

      S 227

      Cu58Sn0.9Ni0.5
      Si0.1 Fe0.8
      Zn Rem.

      Melting point is about 880. Gas welding and carbon arc welding of brass, also braze welding of copper, steel and cast iron.
      熔点880℃。黄铜气焊及碳弧焊用,也可钎焊铜、钢、铸铁

      RBCuZn-B

      S 229

      Cu55 Ni6 Mn4
      Zn

      Melting point is about 920, high strength. Braze welding of steel, nickel and hard carbide.
      熔点约920℃。高强度,钎焊钢、镍及硬质合金用

       

      Aluminum alloys

      S 301

      Al99.5

      Good ductility and corrosion resistance. Gas welding and argon arc welding of pure aluminum.
      塑性好、耐蚀。纯铝气焊、氩弧焊用

      ER1100

      S 311

      Si5 Al Rem.

      Corrosion resistance, wide range of usage. Gas welding and argon arc welding of aluminum alloys other than high magnesium alloys.
      抗裂性好,通用性大。铝合金气焊、氩弧焊用。不宜用高镁合金

      ER4043

      S 321

      Mn1.3 Al Rem.

      Good corrosion resistance, weldability and ductility. Gas welding and argon arc welding of aluminum alloys.
      良好的耐蚀性、可焊性及塑性。铝合金气焊、氩弧焊用

       

      S 331

      Mg5 Mn0.4
      Al Rem.

      Corrosion resistance and high strength. Argon arc welding of aluminum alloys.
      耐蚀,强度高。铝合金氩弧焊用

      ER5183

      斯米克钎焊料分别有:(铜锌钎焊料) ,(磷银基钎焊料),(铝基钎焊料),(锡铅钎焊料),(镍基钎焊料).简介如下:

      Category

      Trade-mark
      牌号

      Specification

      Melting
      Point
      熔点()

      Chemical
      composition
      主要成份(%)

      Application

      Equivalent
      to AWS
      相当AWS

      Copper
      zinc

      铜锌

      L103

      Wire & rod

      885-888

      Cu54 Zn Rem.

      Brazing of copper, bronze and steel, subjected to low load.
      钎焊铜、青铜和钢等受力不大工件

       

      L104

      Foil

      890-930

      Cu57 Mn2
      Co2 Zn Rem.

      Brazing of carbide cutting tool.
      钎焊硬质合金刀具

       

      Copper
      phosphorus

       

      L201

      Cast rod, wire & rod, powder
      铸条、丝、粉

      710-800

      P7 Cu Rem.

      Brazing of copper and copper alloys.
      钎焊铜及铜合金

      BCuP-2

      L204

      Cast rod, wire
      铸条、丝

      640-815

      P5 Ag15
      Cu Rem.

      Brazing of copper, copper alloys, silver and molybdenum etc.
      钎焊铜及铜合金、银、钼等金属。

      BCuP-5

      L205

      Cast rod, wire & rod, powder
      铸条、丝、箔

      640-800

      P6 Ag5
      Cu Rem.

      Brazing of copper and copper alloys.
      钎焊铜及铜合金

      BCuP-3

      L207

      Cast rod, wire & rod
      铸条、丝

      640-770

      P7 Ag5
      Cu Rem.

      Brazing of copper and copper alloys.
      钎焊铜及铜合金

      BCuP-7

      L209

      Cast rod, wire
      铸条、丝

      684-710

      P7 Ag2
      Cu Rem.

      Brazing of copper and copper alloys.
      钎焊铜及铜合金。

      BCuP-6

       Silver
      base

      L302

      Wire & rod

      745-775

      Ag25 Cu40
      Zn Rem.

      Brazing of copper, copper alloys, steel and stainless steel etc.
      钎焊铜及铜合金、钢及不锈钢等

       

      L303

      Wire & rod

      660-725

      Ag45 Cu30
      Zn

      Brazing of copper, copper alloys, steel and stainless steel etc.
      钎焊铜及铜合金、钢及不锈钢等

      BAg-5

      L303F

      Flux coated rod
      涂药丝

      660-725

      Ag45 Cu30
      Zn Rem.

      L303 coated with flux, the same application as L303.
      外涂钎剂的L303,用途与L303相同

      BAg-5

      L304

      Foil

      690-775

      Ag50 Cu34
      Zn Rem.

      Brazing of copper, copper alloys and steel etc.
      钎焊铜及铜合金、钢等

      BAg-6

      L308

      Wire & rod

      779-780

      Ag72 Cu Rem.

      Brazing of copper and nickel under vacuum or reducing protective atmosphere.
      铜和镍的真空或还原保护气氛钎焊

      BAg-8

      L312

      Wire & rod

      595-605

      Ag40.Cu.Zn.Cd

      Brazing of copper, copper alloys, steel and stainless steel etc.
      钎焊铜及铜合金、钢及不锈钢等

       

      L313

      Wire & rod

      625-635

      Ag50.Cu.Zn.Cd

      Brazing of copper, copper alloys, steel and stainless steel etc.
      钎焊铜及铜合金、钢及不锈钢等

      BAg-1a

      L321

      Wire & rod

      615-650

      Ag56.Cu.Zn.Sn

      Brazing of copper, copper alloys, steel and stainless steel etc.
      钎焊铜及铜合金、钢及不锈钢等

      BAg-7

      L323

      Wire & rod

      665-755

      Ag30.Cu.Zn.Sn

      Brazing of copper, copper alloys, steel and stainless steel etc.
      钎焊铜及铜合金、钢及不锈钢等

       

      L325

      Wire & rod

      645-685

      Ag45.Cu.Zn.Sn

      Brazing of copper, copper alloys, steel and stainless steel etc.
      钎焊铜及铜合金、钢及不锈钢等

      BAg-36

      L326

      Wire & rod

      650-720

      Ag38.Cu.Zn.Sn

      Brazing of copper, copper alloys, steel and stainless steel etc.
      钎焊铜及铜合金、钢及不锈钢等

      BAg-34

      Aluminum base

      铝基

      L400

      Cast rod, wire & rod
      铸条、丝

      577-582

      Si11.5
      Al Rem.

      Brazing of aluminum and aluminum alloys.
      铝及铝合金的钎焊

      BAlSi-4

      L401

      Cast rod
      铸条

      525-535

      Si5 Cu28
      Al Rem.

      Brazing of aluminum and aluminum alloys.
      铝及铝合金的钎焊

       

      Tin lead

      L600

      Wire & rod

      183-185

      Sn60 Sb0.8
      Pb Rem.

      Soldering of fusible metals and heat-treated part.
      易熔金属及热处理件的钎焊

      60Sn

      L601

      Wire & rod

      183-227

      Sn18 Sb2
      Pb Rem.

      Soldering of copper, copper alloys and galvanized iron plain sheet.
      铜及铜合金、镀锌铁皮的钎焊。

      18Sn

      L602

      Wire & rod

      183-256

      Sn30 Sb2
      Pb Rem.

      Soldering of copper, brass, copper alloys and galvanized iron plain sheet.
      铜、黄铜、铁、镀锌铁皮的钎焊

      30Sn

      L603

      Wire & rod

      183-235

      Sn40 Sb2
      Pb Rem.

      Soldering of copper, copper alloys, steel and zinc parts.
      铜及铜合金、钢、锌制零件的钎焊

      40Sn

      L604

      Wire & rod

      183-222

      Sn90 Sb0.15
      Pb Rem.

      Soldering of copper and steel for food and medicine field.
      食品、医疗所需铜、钢等金属的钎焊

      90Sn

      L605

      Wire & rod

      232-240

      Ag5 Sn95

      Soldering of copper and steel for electrical and food field.
      电器、食品所需铜、钢等金属的钎焊

       

      L608

      Wire & rod

      295-305

      Sn5.5 Ag2.5
      Pb Rem.

      Soldering of copper, copper alloys, steel and stainless steel.
      铜及铜合金、钢及不锈钢的钎焊

       

      Nickel base

      镍基

      L702

      Powder

      970-1000

      Cr7 B3 Si4
      Ni Rem.

      Brazing of stainless steel under vacuum or protective atmosphere.
      不锈钢真空或保护气氛钎焊

      BNi-2

      Category

      Trade-mark

      Product name

      Characteristics & application
      特性和用途

      Gas
      welding

      CJ301

      Copper gas welding flux
      铜气焊熔剂

      Melting point is about 650, flux for gas welding and brazing of copper and copper alloys.
      熔点约650℃,铜及铜合金气焊或钎焊的助熔剂

      CJ401

      Aluminum gas welding flux
      铝气焊熔剂

      Melting point is about 560, flux for gas welding of aluminum and aluminum alloys.
      熔点约560℃,铝及铝合金气焊的助熔剂

      Silver
      brazing

      QJ101

      Silver brazing flux
      银钎焊熔剂

      Brazing flux of copper, copper alloys, steel and stainless steel within 550-750.
      550-750℃范围钎焊铜及铜合金、钢及不锈钢的助熔剂

      QJ102

      Silver brazing flux
      银钎焊熔剂

      Brazing flux of copper, copper alloys, steel and stainless steel within 600-850.
      600-850℃范围钎焊铜及铜合金、钢及不锈钢的助熔剂

      QJ102A

      Silver brazing flux
      银钎焊熔剂

      Brazing flux of copper, copper alloys, steel and stainless steel within 600-850. Non agglomeration.
      600-850℃范围钎焊铜及铜合金、钢及不锈钢。不易结块

      QJ112

      Silver brazing paste flux

      膏状银钎焊熔剂

      Brazing flux of copper, copper alloys, steel and stainless steel within 600-850.
      600-850℃范围钎焊铜及铜合金、钢及不锈钢的助熔剂

      QJ103

      Silver brazing flux
      银钎焊熔剂

      Brazing flux of copper, copper alloys, steel and stainless steel within 550-750.
      550-750℃范围钎焊铜及铜合金、钢及不锈钢的助熔剂

      Aluminum brazing

      铝钎焊

      QJ201

      Aluminum brazing flux
      铝钎焊熔剂

      Brazing flux of aluminum and aluminum alloys within 450-620.
      450-620℃范围钎焊铝及铝合金的助熔剂

      QJ207

      Aluminum brazing flux
      铝钎焊熔剂

      Brazing flux of aluminum and aluminum alloys within 560-620.
      560-620℃范围钎焊铝及铝合金的助熔剂

      Category

      Trade-
      mark

      Chemical
      composition
      化学成份(%)

      Hardness

      Application

       Oxy-
      Acetylene
      Flame
      spray-
      using

      F103

      Cr10 B1.5 Si3 Ni Rem.

      HRc 25

      Spray-fusing of cast ir, on parts,,, such as die for glass, cylinder, and guide.
      铸铁件的喷焊,如玻璃模具,汽缸、导轨

      F101

      Cr10 B2.5 Si3 Ni Rem.

      HRc 45

      Spray-fusing of parts resistance to wear and corrosion, such as valve, the rotator and piston of pump.
      耐磨、耐蚀件的喷焊,如阀门、泵转子、泵柱塞

      F101Fe

      Cr10 B2.5 Si3 Fe10

      Ni Rem.

      HRc 45

      Spray-fusing of corrosion-resistant parts, such as axle and stigma.
      耐磨件的喷焊,如轴类、汽门

      F102

      Cr16 B4 Si4 Ni Rem.

      HRc 60

      Spray-fusing of parts resistance to wear, corrosion and high temperature oxidation, such as die and piston.
      耐磨、耐蚀、抗高温氧化工件的喷焊,如模具、柱塞

      F102Fe

      Cr16 B4 Si4 Fe15

      Ni Rem.

      HRc 60

      Spray-fusing of corrosion-resistant parts, such as axle and cold die.
      耐磨件的喷焊,如轴类、冷模具

      F105

      F102+50%WC

      HRc 60

      Spray-fusing of parts resistance to grain-wear , such as guide plate, scraper and blade of fan.
      抗磨粒磨损场合的喷焊,如导板、刮板、风机叶片

      F105Fe

      F102Fe+35%WC

      HRc 60

      Spray-fusing of parts resistance to grain-wear, such as guide plate, scraper and blade of fan.
      抗磨粒磨损场合的喷焊,如导板、刮板、风机叶片

      F108

      F102+80%WC

      HRc 60

      Spray-fusing of parts resistance to strong grain-wear and free machining, such as harrow teeth of dredger.
      抗强烈磨粒磨损,无需加工场合的喷焊,如挖泥船耙齿

      F301

      Cr5 B4 Si4 Ni30

      Fe Rem.

      HRc 45

      Spray-fusing of vulnerable parts of agricultural machinery and mining machinery, such as gear and axletree.
      农机,矿山机械易损件的喷焊,如齿轮,车轴

      Track iron powder

      轨铁粉

      Cr5 B1.5 Si3 Ni30

      Fe Rem.

      HRc 28

      Repair spray-fusing of defects such as scratch and concavity of railroad track.
      铁路钢轨擦伤、低塌等缺陷的修复喷焊

      Oxy-acetylene flame spraying

      F111

      Cr5 B1.5 Si3 Ni30

      Fe Rem.

      HB 150

      Spraying of bearing and cutting parts etc.
      轴承、切削件等的喷涂

      F113

      Cr10 B1.5 Si3 Ni Rem.

      HB 250

      Spray-fusing or spraying, such as roll, piston and axle of wear and corrosion resistance.
      喷涂亦可喷焊,如滚筒、柱塞、耐蚀耐磨轴等

      F313

      Cr15 B1.5 Fe Rem.

      HB 250

      Spraying of dryer of papermaking and axle.
      造纸烘缸、轴类的喷涂

      F314

      Cr18 Ni9 B1.5 Fe Rem.

      HB 250

      Spraying of axle.
      轴类喷涂

      F412

      Sn10 P0.3 Cu Rem.

      HB 80

      Spraying of axle and bearing.
      轴、轴承的喷涂

      F512

      复合Al5Ni95

      Backing spray of transition layer between base and working layer.
      喷涂层的基体与工作层之间过渡(打底)层用喷涂

      PTA

      hardfacing

      F221

      Cr26 W5 B0.7 Co Rem.

      HRc 43

      PTA hardfacing of sealing surface of high temperature and high pressure valve and the edge of hot shearing tool.
      高温高压阀门密封面、热剪切刃口的等离子喷焊

      F223

      Cr21 W5 B1.5 Co Rem.

      HRc 40

      PTA hardfacing of parts resistance to wear and corrosion at high temperature, such as valve under high temperature and high pressure, and blower.
      高温下耐磨耐蚀件的喷焊,如高温高压阀门、鼓风机

      F321

      Cr13 B1.5 Si1 Fe Rem.

      HRc 45

      PTA hardfacing of corrosion-resistant parts under mid-temperature and mid-pressure, such as stop-plate etc.
      中温中压阀门的闸板及其他耐磨件的等离子喷焊

      F322

      Cr23 Ni13 Si5 B1

      Fe Rem.

      HRc 40

      PTA hardfacing of corrosion-resistant parts under mid-temperature and mid-pressure, such as valve base etc.
      中温中压阀门的阀座及其他耐磨件的等离子喷焊

      F422

      Sn10 P0.3 Cu Rem.

      HB 80

      PTA hardfacing of axle and bearing etc.
      轴、轴承等离子喷焊

    在线询盘/留言
  • 0571-87774297