产业政策
    上海斯米克ENi-1镍合金焊条
    发布者:hebote  发布时间:2019-07-18 16:32:08  访问次数:

    上海斯米克ENi-1镍合金焊条上海斯米克焊条焊丝 【上海斯米克电焊条】简介

    Category

    Trade-
    Mark

    Equivalent to China Standard
    相当国标

    Characteristics & application
    特性和用途

    Equivalent to AWS
    相当AWS

    Hard-surfacing

    D 667

    EDZCr-B-15

    HRc48. Resistance to wear, gas corrosion and oxidation. Hardfacing of blast furnace hopper and cracker part.
    HRc48,耐磨、耐气蚀、抗氧化。堆焊高炉料钟、破碎机件

    D 802

    EDCoCr-A-03

    HRc38-47. Resistance to heat, wear and corrosion. Hardfacing of high temperature part such as the edge of thermo-cutter.
    HRc38-47,耐热、耐蚀、耐磨。堆焊高温工件如热剪切刀刃

    ECoCr-A

    D 812

    EDCoCr-B-03

    HRc45-50. Resistance to heat, wear and corrosion. Hardfacing of high temperature part such as internal-combustion engine valve.
    HRc45-50,耐热、耐蚀、耐磨。堆焊高温工件如内燃机阀

    ECoCr-B

    D 822

    HRc53. Resistance to Wear and heat, bad shock resistance. Hardfacing of rotating blade wheel of boiler.
    HRc53,耐热、耐磨,但抗冲击性差。堆焊锅炉旋转叶轮

    D 832

    EDCoCr-C-03

    HRc50. Wear and heat resistance. Hardfacing of high temperature part such as hot-rolling guided way.
    HRc50,耐热、耐磨。堆焊高温工件如热轧导轨

    ECoCr-C

    D 842

    EDCoCr-D-03

    HRc28-38. Corrosion and thermo-fatigue resistance, work harding. Hardfacing of hot forging die.
    HRc28-38,耐蚀、抗热疲劳,具有加工硬化性。堆焊热锻模

    Cast iron

    Z 308

    EZNi

    Pure nickel, excellent general properties. Used to weld thin cast iron part and repair welding machined surface, such as guided way of machine tool.
    纯镍,综合性能好。铸铁薄件及加工面补焊用,如机床导卫

    ENi-Cl

    Z 408

    EZNiFe

    Iron nickel, high strength and excellent ductility. Repair welding of important gray cast iron and nodular cast iron, such as cylinder cap.
    镍铁,强度高、塑性好。重要灰铸铁及球铁焊补用,如汽缸盖

    ENiFe-Cl

    Z 508

    EZNiCu-1

    Copper nickel, good machinability and bad crack resistance. Repair welding of sand hole and gray cast iron machined surface subject to no load.
    镍铜,易加工,但抗裂性较差。不受力的灰铸铁加工面及砂眼补焊

    ENiCu-B

    Copper alloys

    Cu 107

    ECu

    Red copper, atmosphere and sea water corrosion and excellent electric conductivity. Welding of red copper such as electrical copper row.
    紫铜,耐大气,海水腐蚀,导电性好。紫铜焊接用,如导电铜排

    ECu

    Cu 207

    ECuSi

    Silicon bronze, corrosion resistance and high strength. Welding of copper, silicon bronze and brass.
    硅青铜,耐蚀、强度高。铜、硅青铜及黄铜焊接用

    ECuSi

    Cu 227

    ECuSnB

    Tin phosphor bronze, corrosion resistance and high strength. Welding of copper, silicon bronze and brass.
    锡磷青铜,耐蚀、强度高。铜、硅青铜及黄铜焊接用

    ECuSn-C

    Cu 237

    ECuAl

    Aluminum bronze, wear and corrosion and high strength. Welding or surfacing of copper alloys.
    铝青铜,耐磨、耐蚀,强度高。铜合金焊接或堆焊用

    ECuAl-A2

    Aluminum alloys

    Al 109

    TAl

    Pure aluminum, excellent corrosion resistance and middle strength. Welding of pure aluminum.
    纯铝,耐蚀性好,但强度不高,纯铝焊接用

    E1100

    Al 209

    TAlSi

    Silicon aluminum, good crack resistance and wide range of usage. Welding of aluminum alloys other than aluminum magnesium alloys.
    铝硅,抗裂性好,通用性大。铝合金焊接用,不宜焊接铝镁合金

    E4043

    Al 309

    TAMn

    Manganese aluminum, corrosion resistance and high strength. Welding of aluminum alloys.
    铝锰,强度高,耐蚀。铝合金焊接用

    E3003

    Nickel alloys

    镍合金

    Ni 102

    ENi-1

    Pure nickel. Welding and surfacing of nickel and nickel to steel.
    纯镍,用于镍、镍与钢的焊接与堆焊

    ENi-1

    Ni 207

    ENiCu-7

    Copper nickel. Welding and surfacing of copper nickel and copper nickel to steel.
    镍铜,用于镍铜、镍铜与钢的焊接与堆焊

    ENiCu-7

    Category

    Trade
    mark

    Chemical comPOSTTTION

    主要成份(%)

    Characteristics & application

    特性和用途

    Equivalent to AWS

    相当AWS

    Hardfacing

    S 101

    C3 Cr28 Ni4
    Si3.5 Fe Rem.

    HRc48-54. Resistance to wear, gas corrosion and oxidation. Hardfacing of bucket tooth and case pump.
    HRc48-54,耐磨、耐气蚀、抗氧化。堆焊铲斗齿,泵套

    S 111

    C1 Cr29 W5
    Co Rem.

    HRc38-47. Resistance to wear and corrosion at high-temperature. Hardfacing of high temperature and pressure valve.
    HRc38-47,高温下耐磨、耐蚀。堆焊高温高压阀门

    ECoCr-A

    S 112

    C1.5 Cr29 W8
    Co Rem.

    HRc45-50. Resistance to wear and corrosion at high-temperature. Hardfacing of valve and hot-rolling pass.
    HRc45-50,高温下耐磨、耐蚀。堆焊阀门,热轧孔型

    ECoCr-B

    S 113

    C2.5 Cr30 W17
    Co Rem.

    HRc55. Wear and heat resistance at high temperature, bad shock resistance. Hardfacing of screw charging carriage.
    HRc55,高温下耐磨、耐热,但抗冲击性差。堆焊螺旋送料机用

    S 114

    C2.5 Cr30 W12
    Co Rem.

    HRc53. Wear and heat resistance at high temperature, bad shock resistance. Hardfacing of three-cone bit.
    HRc53,高温下耐磨、耐热,但抗冲击较差。堆焊牙轮钻头

    ECoCr-C

    Copper

    alloys


    S 201

    Sn1 Si0.3Mn0.3
    Cu Rem.

    Good mechanical properties and crack resistance. Gas welding and argon arc welding of red copper.
    机械性能好,抗裂性好。紫铜气焊及氩弧焊用

    ERCu

    S 211

    Si3 Mn1
    Cu Rem.

    Good mechanical properties. Argon arc welding of copper alloys and MIG brazing of steel.
    机械性能好,铜合金氩弧焊及钢的MIG钎焊用

    ERCuSi-Al

    S 212

    Sn5 Cu Rem.

    Wear resistance. Argon arc welding of copper alloys and surfacing of steel.
    耐磨性好。铜合金氩弧焊及钢的堆焊用

    ERCuSn-A

    S 213

    Sn8 Cu Rem.

    Wear resistance. Argon arc welding of copper alloys and surfacing of steel.
    耐磨性好。铜合金氩弧焊及钢的堆焊用

    ERCuSn-C

    S 214

    Al7.5 Cu Rem.

    Wear and corrosion resistance. Argon arc welding of copper alloys and surfacing of steel.
    耐磨、耐蚀。铜合金氩弧焊及钢的堆焊用

    ERCuAl-A1

    S 215

    Al9 Cu Rem.

    Wear and corrosion resistance. Argon arc welding of copper alloys and surfacing of steel.
    耐磨、耐蚀。铜合金氩弧焊及钢的堆焊用

    ERCuAl-A2

    S 221

    Cu60 Sn1 Si0.3
    Zn Rem.

    Melting point is about 890. Gas welding and carbon arc welding of brass, also braze welding of copper, steel and cast iron.
    熔点约890℃。黄铜气焊及碳弧焊用,也可钎焊铜、钢、铸铁

    S 221F

    Cu60 Sn1 Si 0.3
    Zn Rem.

    S221 welding rod coated with flux.
    外涂焊剂的S221焊丝

    S 222

    Cu58Sn0.9Si0.1
    Fe0.8 Zn Rem.

    Melting point is about 880. Gas welding and carbon arc welding of brass, also braze welding of copper, steel and cast iron.
    熔点约880℃。黄铜气焊及碳弧焊用,也可钎焊铜、钢、铸铁

    RBCuZn-C

    S 222F

    Cu58Sn0.9Si0.1
    Fe0.8 Zn Rem.

    S222 welding rod coated with flux.
    外涂焊剂的S222焊丝

    RBCuZn-C

    S 223

    Cu59 Sn0.6
    Zn Rem.

    Melting point is about 900. Braze welding of copper, steel and cast iron.
    熔点约900℃。铜、钢、铸铁钎焊用

    RBCuZn-A

    S 224

    Cu62 Si0.5
    Zn Rem.

    Melting point is about 905. Gas welding and carbon arc welding of brass, also braze welding of copper, steel and cast iron.
    熔点约905℃。黄铜气焊及碳弧焊用,也可钎焊铜、钢、铸铁

    Copper
    alloys

    S 225

    Cu48 Ni10
    Zn Rem.

    Melting point is about 935 and high strength. Braze welding of steel, nickel and carbide alloys.
    熔点约935℃。高强度,钎焊钢、镍及硬质合金用

    RBCuZn-D

    S 225F

    Cu48 Ni10
    Zn Rem.

    S225 welding rod coated with flux.
    外涂焊剂的S225焊丝

    RBCuZn-D

    S 226

    Cu60 Sn0.3
    Si0.2 Zn Rem.

    Melting point is about 900. Gas welding of brass, also braze welding of copper, steel and cast iron.
    熔点约900℃。黄铜气焊用,也可钎焊铜、钢、铸铁

    S 227

    Cu58Sn0.9Ni0.5
    Si0.1 Fe0.8
    Zn Rem.

    Melting point is about 880. Gas welding and carbon arc welding of brass, also braze welding of copper, steel and cast iron.
    熔点880℃。黄铜气焊及碳弧焊用,也可钎焊铜、钢、铸铁

    RBCuZn-B

    S 229

    Cu55 Ni6 Mn4
    Zn

    Melting point is about 920, high strength. Braze welding of steel, nickel and hard carbide.
    熔点约920℃。高强度,钎焊钢、镍及硬质合金用

    Aluminum alloys

    S 301

    Al99.5

    Good ductility and corrosion resistance. Gas welding and argon arc welding of pure aluminum.
    塑性好、耐蚀。纯铝气焊、氩弧焊用

    ER1100

    S 311

    Si5 Al Rem.

    Corrosion resistance, wide range of usage. Gas welding and argon arc welding of aluminum alloys other than high magnesium alloys.
    抗裂性好,通用性大。铝合金气焊、氩弧焊用。不宜用高镁合金

    ER4043

    S 321

    Mn1.3 Al Rem.

    Good corrosion resistance, weldability and ductility. Gas welding and argon arc welding of aluminum alloys.
    良好的耐蚀性、可焊性及塑性。铝合金气焊、氩弧焊用

    S 331

    Mg5 Mn0.4
    Al Rem.

    Corrosion resistance and high strength. Argon arc welding of aluminum alloys.
    耐蚀,强度高。铝合金氩弧焊用

    ER5183

    斯米克钎焊料分别有:(铜锌钎焊料) ,(磷银基钎焊料),(铝基钎焊料),(锡铅钎焊料),(镍基钎焊料).简介如下:

    Category

    Trade-mark
    牌号

    Specification

    Melting
    Point
    熔点()

    Chemical
    comPOSTTTION
    主要成份(%)

    Application

    Equivalent
    to AWS
    相当AWS

    Copper
    zinc

    铜锌

    L103

    Wire & rod

    885-888

    Cu54 Zn Rem.

    Brazing of copper, bronze and steel, subjected to low load.
    钎焊铜、青铜和钢等受力不大工件

    L104

    Foil

    890-930

    Cu57 Mn2
    Co2 Zn Rem.

    Brazing of carbide cutting tool.
    钎焊硬质合金刀具

    Copper
    phosphorus


    L201

    Cast rod, wire & rod, powder
    铸条、丝、粉

    710-800

    P7 Cu Rem.

    Brazing of copper and copper alloys.
    钎焊铜及铜合金

    BCuP-2

    L204

    Cast rod, wire
    铸条、丝

    640-815

    P5 Ag15
    Cu Rem.

    Brazing of copper, copper alloys, silver and molybdenum etc.
    钎焊铜及铜合金、银、钼等金属。

    BCuP-5

    L205

    Cast rod, wire & rod, powder
    铸条、丝、箔

    640-800

    P6 Ag5
    Cu Rem.

    Brazing of copper and copper alloys.
    钎焊铜及铜合金

    BCuP-3

    L207

    Cast rod, wire & rod
    铸条、丝

    640-770

    P7 Ag5
    Cu Rem.

    Brazing of copper and copper alloys.
    钎焊铜及铜合金

    BCuP-7

    L209

    Cast rod, wire
    铸条、丝

    684-710

    P7 Ag2
    Cu Rem.

    Brazing of copper and copper alloys.
    钎焊铜及铜合金。

    BCuP-6

    Silver
    base

    L302

    Wire & rod

    745-775

    Ag25 Cu40
    Zn Rem.

    Brazing of copper, copper alloys, steel and stainless steel etc.
    钎焊铜及铜合金、钢及不锈钢等

    L303

    Wire & rod

    660-725

    Ag45 Cu30
    Zn

    Brazing of copper, copper alloys, steel and stainless steel etc.
    钎焊铜及铜合金、钢及不锈钢等

    BAg-5

    L303F

    Flux coated rod
    涂药丝

    660-725

    Ag45 Cu30
    Zn Rem.

    L303 coated with flux, the same application as L303.
    外涂钎剂的L303,用途与L303相同

    BAg-5

    L304

    Foil

    690-775

    Ag50 Cu34
    Zn Rem.

    Brazing of copper, copper alloys and steel etc.
    钎焊铜及铜合金、钢等

    BAg-6

    L308

    Wire & rod

    779-780

    Ag72 Cu Rem.

    Brazing of copper and nickel under vacuum or reducing protective atmosphere.
    铜和镍的真空或还原保护气氛钎焊

    BAg-8

    L312

    Wire & rod

    595-605

    Ag40.Cu.Zn.Cd

    Brazing of copper, copper alloys, steel and stainless steel etc.
    钎焊铜及铜合金、钢及不锈钢等

    L313

    Wire & rod

    625-635

    Ag50.Cu.Zn.Cd

    Brazing of copper, copper alloys, steel and stainless steel etc.
    钎焊铜及铜合金、钢及不锈钢等

    BAg-1a

    L321

    Wire & rod

    615-650

    Ag56.Cu.Zn.Sn

    Brazing of copper, copper alloys, steel and stainless steel etc.
    钎焊铜及铜合金、钢及不锈钢等

    BAg-7

    L323

    Wire & rod

    665-755

    Ag30.Cu.Zn.Sn

    Brazing of copper, copper alloys, steel and stainless steel etc.
    钎焊铜及铜合金、钢及不锈钢等

    L325

    Wire & rod

    645-685

    Ag45.Cu.Zn.Sn

    Brazing of copper, copper alloys, steel and stainless steel etc.
    钎焊铜及铜合金、钢及不锈钢等

    BAg-36

    L326

    Wire & rod

    650-720

    Ag38.Cu.Zn.Sn

    Brazing of copper, copper alloys, steel and stainless steel etc.
    钎焊铜及铜合金、钢及不锈钢等

    BAg-34

    Aluminum base

    铝基

    L400

    Cast rod, wire & rod
    铸条、丝

    577-582

    Si11.5
    Al Rem.

    Brazing of aluminum and aluminum alloys.
    铝及铝合金的钎焊

    BAlSi-4

    L401

    Cast rod
    铸条

    525-535

    Si5 Cu28
    Al Rem.

    Brazing of aluminum and aluminum alloys.
    铝及铝合金的钎焊

    Tin lead

    L600

    Wire & rod

    183-185

    Sn60 Sb0.8
    Pb Rem.

    Soldering of fusible metals and heat-treated part.
    易熔金属及热处理件的钎焊

    60Sn

    L601

    Wire & rod

    183-227

    Sn18 Sb2
    Pb Rem.

    Soldering of copper, copper alloys and galvanized iron plain sheet.
    铜及铜合金、镀锌铁皮的钎焊。

    18Sn

    L602

    Wire & rod

    183-256

    Sn30 Sb2
    Pb Rem.

    Soldering of copper, brass, copper alloys and galvanized iron plain sheet.
    铜、黄铜、铁、镀锌铁皮的钎焊

    30Sn

    L603

    Wire & rod

    183-235

    Sn40 Sb2
    Pb Rem.

    Soldering of copper, copper alloys, steel and zinc parts.
    铜及铜合金、钢、锌制零件的钎焊

    40Sn

    L604

    Wire & rod

    183-222

    Sn90 Sb0.15
    Pb Rem.

    Soldering of copper and steel for food and medicine field.
    食品、医疗所需铜、钢等金属的钎焊

    90Sn

    L605

    Wire & rod

    232-240

    Ag5 Sn95

    Soldering of copper and steel for electrical and food field.
    电器、食品所需铜、钢等金属的钎焊

    L608

    Wire & rod

    295-305

    Sn5.5 Ag2.5
    Pb Rem.

    Soldering of copper, copper alloys, steel and stainless steel.
    铜及铜合金、钢及不锈钢的钎焊

    Nickel base

    镍基

    L702

    Powder

    970-1000

    Cr7 B3 Si4
    Ni Rem.

    Brazing of stainless steel under vacuum or protective atmosphere.
    不锈钢真空或保护气氛钎焊

    BNi-2

    Category

    Trade-mark

    Product name

    Characteristics & application
    特性和用途

    Gas
    welding

    CJ301

    Copper gas welding flux
    铜气焊熔剂

    Melting point is about 650, flux for gas welding and brazing of copper and copper alloys.
    熔点约650℃,铜及铜合金气焊或钎焊的助熔剂

    CJ401

    Aluminum gas welding flux
    铝气焊熔剂

    Melting point is about 560, flux for gas welding of aluminum and aluminum alloys.
    熔点约560℃,铝及铝合金气焊的助熔剂

    Silver
    brazing

    QJ101

    Silver brazing flux
    银钎焊熔剂

    Brazing flux of copper, copper alloys, steel and stainless steel within 550-750.
    550-750℃范围钎焊铜及铜合金、钢及不锈钢的助熔剂

    QJ102

    Silver brazing flux
    银钎焊熔剂

    Brazing flux of copper, copper alloys, steel and stainless steel within 600-850.
    600-850℃范围钎焊铜及铜合金、钢及不锈钢的助熔剂

    QJ102A

    Silver brazing flux
    银钎焊熔剂

    Brazing flux of copper, copper alloys, steel and stainless steel within 600-850. Non agglomeration.
    600-850℃范围钎焊铜及铜合金、钢及不锈钢。不易结块

    QJ112

    Silver brazing paste flux

    膏状银钎焊熔剂

    Brazing flux of copper, copper alloys, steel and stainless steel within 600-850.
    600-850℃范围钎焊铜及铜合金、钢及不锈钢的助熔剂

    QJ103

    Silver brazing flux
    银钎焊熔剂

    Brazing flux of copper, copper alloys, steel and stainless steel within 550-750.
    550-750℃范围钎焊铜及铜合金、钢及不锈钢的助熔剂

    Aluminum brazing

    铝钎焊

    QJ201

    Aluminum brazing flux
    铝钎焊熔剂

    Brazing flux of aluminum and aluminum alloys within 450-620.
    450-620℃范围钎焊铝及铝合金的助熔剂

    QJ207

    Aluminum brazing flux
    铝钎焊熔剂

    Brazing flux of aluminum and aluminum alloys within 560-620.
    560-620℃范围钎焊铝及铝合金的助熔剂

    Category

    Trade-
    mark

    Chemical
    comPOSTTTION
    化学成份(%)

    Hardness

    Application

    Oxy-
    Acetylene
    Flame
    spray-
    using

    F103

    Cr10 B1.5 Si3 Ni Rem.

    HRc 25

    Spray-fusing of cast iron parts,, such as die for glass, cylinder, and guide.
    铸铁件的喷焊,如玻璃模具,汽缸、导轨

    F101

    Cr10 B2.5 Si3 Ni Rem.

    HRc 45

    Spray-fusing of parts resistance to wear and corrosion, such as valve, the rotator and piston of pump.
    耐磨、耐蚀件的喷焊,如阀门、泵转子、泵柱塞

    F101Fe

    Cr10 B2.5 Si3 Fe10

    Ni Rem.

    HRc 45

    Spray-fusing of corrosion-resistant parts, such as axle and stigma.
    耐磨件的喷焊,如轴类、汽门

    F102

    Cr16 B4 Si4 Ni Rem.

    HRc 60

    Spray-fusing of parts resistance to wear, corrosion and high temperature oxidation, such as die and piston.
    耐磨、耐蚀、抗高温氧化工件的喷焊,如模具、柱塞

    F102Fe

    Cr16 B4 Si4 Fe15

    Ni Rem.

    HRc 60

    Spray-fusing of corrosion-resistant parts, such as axle and cold die.
    耐磨件的喷焊,如轴类、冷模具

    F105

    F102+50%WC

    HRc 60

    Spray-fusing of parts resistance to grain-wear , such as guide plate, scraper and blade of fan.
    抗磨粒磨损场合的喷焊,如导板、刮板、风机叶片

    F105Fe

    F102Fe+35%WC

    HRc 60

    Spray-fusing of parts resistance to grain-wear, such as guide plate, scraper and blade of fan.
    抗磨粒磨损场合的喷焊,如导板、刮板、风机叶片

    F108

    F102+80%WC

    HRc 60

    Spray-fusing of parts resistance to strong grain-wear and free machining, such as harrow teeth of dredger.
    抗强烈磨粒磨损,无需加工场合的喷焊,如挖泥船耙齿

    F301

    Cr5 B4 Si4 Ni30

    Fe Rem.

    HRc 45

    Spray-fusing of vulnerable parts of agricultural machinery and mining machinery, such as gear and axletree.
    农机,矿山机械易损件的喷焊,如齿轮,车轴

    Track iron powder

    轨铁粉

    Cr5 B1.5 Si3 Ni30

    Fe Rem.

    HRc 28

    Repair spray-fusing of defects such as scratch and concavity of railroad track.
    铁路钢轨擦伤、低塌等缺陷的修复喷焊

    Oxy-acetylene flame spraying

    F111

    Cr5 B1.5 Si3 Ni30

    Fe Rem.

    HB 150

    Spraying of bearing and cutting parts etc.
    轴承、切削件等的喷涂

    F113

    Cr10 B1.5 Si3 Ni Rem.

    HB 250

    Spray-fusing or spraying, such as roll, piston and axle of wear and corrosion resistance.
    喷涂亦可喷焊,如滚筒、柱塞、耐蚀耐磨轴等

    F313

    Cr15 B1.5 Fe Rem.

    HB 250

    Spraying of dryer of papermaking and axle.
    造纸烘缸、轴类的喷涂

    F314

    Cr18 Ni9 B1.5 Fe Rem.

    HB 250

    Spraying of axle.
    轴类喷涂

    F412

    Sn10 P0.3 Cu Rem.

    HB 80

    Spraying of axle and bearing.
    轴、轴承的喷涂

    F512

    复合Al5Ni95

    Backing spray of transition layer between base and working layer.
    喷涂层的基体与工作层之间过渡(打底)层用喷涂

    PTA

    hardfacing

    F221

    Cr26 W5 B0.7 Co Rem.

    HRc 43

    PTA hardfacing of sealing surface of high temperature and high pressure valve and the edge of hot shearing tool.
    高温高压阀门密封面、热剪切刃口的等离子喷焊

    F223

    Cr21 W5 B1.5 Co Rem.

    HRc 40

    PTA hardfacing of parts resistance to wear and corrosion at high temperature, such as valve under high temperature and high pressure, and blower.
    高温下耐磨耐蚀件的喷焊,如高温高压阀门、鼓风机

    F321

    Cr13 B1.5 Si1 Fe Rem.

    HRc 45

    PTA hardfacing of corrosion-resistant parts under mid-temperature and mid-pressure, such as stop-plate etc.
    中温中压阀门的闸板及其他耐磨件的等离子喷焊

    F322

    Cr23 Ni13 Si5 B1

    Fe Rem.

    HRc 40

    PTA hardfacing of corrosion-resistant parts under mid-temperature and mid-pressure, such as valve base etc.
    中温中压阀门的阀座及其他耐磨件的等离子喷焊

    F422

    Sn10 P0.3 Cu Rem.

    HB 80

    PTA hardfacing of axle and bearing etc.
    轴、轴承等离子喷焊

免责声明:焊材网转载作品均注明出处,本网未注明出处和转载的,是出于传递更多信息之目的,并不意味 着赞同其观点或证实其内容的真实性。如转载作品侵犯作者署名权,或有其他诸如版权、肖像权、知识产权等方面的伤害,并非本网故意为之,在接到相关权利人通知后将立即加以更正。联系电话:0571-87774297。
0571-87774297